News

How the hoop is made

2022-07-28

xinglin

xinglin

Hoop connection is a connection method, and belt connection technology is also called groove connection technology.

How the hoop is made

Hoop connection is a connection method, and belt connection technology is also called groove connection technology.The socket of the groove clamp is stuck in the annular tank of the pipe. When the pipe has sufficient axial tension, it cannot be opened, and the clamp is fixed with 2 bolts, so it is simple, convenient and reliable.The pipe connected to the tank has a gap directly between the end faces of the pipe to ensure that the axial displacement of the pipe is very small.The gap sealing is achieved by a compressed rubber ring.The working principle of the groove is to enter the rubber ring in the tube.The rubber ring is pressed in the belt chamber through the pressure of the medium itself to ensure sealing. The size of the rubber ring is slightly larger than the gap formed by the belt and the tube, and it is further pressed in the bolting after the rubber ring to further enhance the sealing effect.The grooved connection joint includes two main products: 1 joint connecting the sealing effect, there is a rigid joint, a flexible joint, a mechanical tee and a grooved flange 2 connected to the transition effect, the pipe has elbows, T-Tube, Cross, ABAX pipe, blind plate and other valve bite connections have been developed in our country.After the fastening nut is bitten, the blade bites into the outer wall of the tube, and the outer cone of the bite is in close contact with the inner cone, so leakage can be reliably prevented.The pipe joint is composed of two semicircles, allowing the expansion and angular displacement of adjacent pipes.Place the annular sealing ring in the beam belt and press the sealing ring with bolt fasteners with bolts.With an annular joint, the pipe end has an annular slotted pipe joint, the pipe end and the groove, and the pipe end has a flange.After the joint parts of the pipe and pipe are processed into the ring groove, the groove is assembled into a quick connector composed of a shunt fixture, a C-type rubber seal and fasteners.

Key words：

Previous：

What is the future development direction of high pressure ball valve

Next：

Through classification and transportation, what to pay attention to when installing or using

RELATED NEWS

Classification and preventive measures of liquid control check valves

Classification and preventive measures of liquid control check valves

2023-11-23

A liquid-controlled check valve is a valve that relies on controlling fluid pressure to reverse the check valve.This valve has a more important position in the hydraulic support equipment of coal mining machinery.It is a more controlled oil channel with a normal check valve.When the control oil is not connected to the pressure oil, it can act like a normal check valve, and the pressure oil only flows from the oil port to the outlet.Cannot flow in reverse.When there is a control pressure input in the control oil path, the piston rod moves to the right under the pressure oil, and the check valve is opened with the top rod to rotate the inlet and outlet.If the oil change port is larger than the oil port, the oil can flow in reverse.
What is a one-way valve and a one-way valve for liquid control?

What is a one-way valve and a one-way valve for liquid control?

2023-11-23

The check valve includes a normal check valve and a hydraulic check valve.The structure, principle and application of check valve and hydraulic check valve are introduced.The figure below shows the commonly used check valve and hydraulic check valve products.
What are the relevant preventive measures for intermediate joints for mining?

What are the relevant preventive measures for intermediate joints for mining?

2023-11-23

What problems should I pay attention to when purchasing intermediate connectors?，

Please leave your valuable feedback

Submit